Configure The Settings Relating To The Auto Pan Function ("Auto Pan" Setup Menu); Register The Preset Positions - Panasonic WV-X6531N Operating Instructions Manual

2 Settings
[Delete] button
Deletes the preset position specified by the position number.
[Close] button
Click this button to close the "Preset position" setup menu.

Register the preset positions

1.
Select a preset position number.
→
The selected preset position number will be displayed in the "Position No" area.
When the selected number has already been registered, the camera will move to the selected preset
position.
2.
Move the camera to the desired direction.
3.
To display the preset ID on the "Live" page, select "On" for "Preset ID" and enter the desired position title
to be displayed.
4.
The settings for "Auto focus" and "Dwell time" can be configured for each position independently.
5.
Click the [Set] button.
6.
The settings for each item such as "Super Dynamic" can be configured for each position independently.
The settings for "Super Dynamic", "BLC/ HLC" and "Mask area" are updated immediately.
Note
•
When registering the preset position, the camera direction may move slightly.
•
When a setting other than "Scene file is not applied" is selected for "Scene file" of "Image adjust",
"Super", "BLC/ HLC", and "Mask area" cannot be used.
2.5.5.4 Configure the settings relating to the auto pan function ("Auto
pan" setup menu)
Click the [Setup>>] button of "Auto pan" on the [Image/Position] tab of the "Image/Audio" page (®Page 107).
124 Operating Instructions