Panasonic WV-X6531N Operating Instructions Manual page 22

1 Operations
Pan/Tilt
Controls the camera direction. The camera will pan or tilt to each direction by pressing the
corresponding dial key.
Zoom display
It is possible to perform zooming operations of the camera by pressing "*" or "#".
Refresh control
Press the dial key "5" or the [Manual Refresh] button to refresh the camera images.
Press the [Auto Refresh] button to refresh the images from the camera in 5-second intervals.
When the dial key "5" or the [Manual Refresh] button is pressed again, the refresh mode of the camera
will return to manual refresh.
IMPORTANT
•
Transmission will be periodically performed when "Auto Refresh" is selected for the camera
image. Confirm the contract plan of the cellular phone in use before using this function.
•
Depending on the cellular phone in use, "Auto Refresh" may be unavailable.
Resolution control
Changes the image capture size by pressing the dial key "0".
•
Image in the aspect ratio of "4:3": Changes the image capture size between 320x240 (default) and
640x480.
•
Image in the aspect ratio of "16:9": Changes the image capture size between 320x180 (default)
and 640x360.
Home position
The camera will move to the home position. (®Page 104)
Home position will be displayed only when home position is set.
Preset
The camera images will be displayed in a preset direction when a dial key on each window is pressed.
(The dial key numbers are not displayed for Preset No. 5 or greater. Only preset IDs will be displayed.)
(®Page 120)
AUX control
Controls the AUX terminal. These buttons will be displayed only when "AUX output" is selected for
"Terminal 3" on the setup menu. (®page 56)
Note
•
Some cellular phones cannot change the image capture size even when resolution is changed by
resolution control.
•
Depending on the image capture size selected for "JPEG(1)", "JPEG(2)", or "JPEG(3)", "Resolution"
may not be able to be used.
•
When the HTTP port number is changed from "80", enter "http://IP address: (colon) + port number/
mobile" in the address box of the browser. When using the DDNS function, access to "http://Host
*1
name registered in the DDNS server: (colon) + port number/mobile".
•
When "HTTPS" is selected for "HTTPS" - "Connection" on the [Advanced] tab of the "Network" page,
enter as follows.
"https://IP address: (colon) + port number/mobile" or "https://Host name registered in the DDNS server:
(colon) + port number/mobile"
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the cellular phone in use, password entry may be required each time the
screen is switched.
•
It is impossible to send and receive audio using a mobile terminal.
•
Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
a setting close to the lowest quality setting for "Image quality setting" of "JPEG" (®page 96) may
sometimes solve this problem.
•
Depending on the cellular phone in use or its contract plan, it may be impossible to access.
22 Operating Instructions