Configure The Settings Relating To Ddns - Panasonic WV-X6531N Operating Instructions Manual

[CRT key generate]
CRT key (SSL encryption key) used for the HTTPS protocol is generated. To generate the CRT key, click the
[Execute] button to display "CRT key generate" dialog box.
[CA Certificate - Generate Certificate Signing Request]
When using the CA certificate issued by CA (Certificate Authority) as the CA certificate used for the HTTPS
protocol, the CSR (Certificate Signing Request) will be generated.
To generate the CSR, click the [Execute] button to display the "CA Certificate - Generate Certificate Signing
Request" dialog window.
[CA Certificate - CA Certificate install]
Installs the CA certificate issued by CA (Certificate Authority) and displays the information of the installed CA
certificate.
To install the CA certificate, click the [Browse...] button to display the [Open] dialog box, and select the file of
the CA certificate issued by CA, and click the [Execute] button.
[CA Certificate - Information]
Displays the information of the CA certificate.
When the [Confirm] button is clicked, the registered information of the installed CA certificate will be displayed
in the "CA Certificate - Confirm" dialog box. If the CA certificate is not installed, the content of the generated
CSR file will be displayed.
When the [Delete] button is clicked, the installed CA certificate will be deleted.
IMPORTANT
•
Before deleting the valid CA certificate, confirm that there is a backup file of the CA certificate on the
PC or another media. The backup file of the CA certificate will be required when installing the CA
certificate again.
Note
•
After changing the connection setting, access the camera again by after waiting a while according to
the changed setting ("http://IP address of the camera" or "https://IP address of the camera").
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of images
may be lower.
•
When the camera is accessed using the HTTPS protocol, it may take time to display images.
•
When the camera is accessed using the HTTPS protocol, the images may be distorted or audio may
be interrupted.
•
The maximum number of concurrent access user varies depending on the maximum image size and
transmission format.

2.9.2.6 Configure the settings relating to DDNS

To access this camera via the Internet, it is necessary to configure the settings for the DDNS function.
2 Settings
Operating Instructions 199