Action At An Alarm Occurrence; Alarm Type - Panasonic WV-X6531N Operating Instructions Manual

1 Operations

1.4 Action at an alarm occurrence

The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur.

1.4.1 Alarm type

•
Terminal alarm: When connecting an alarm device such as a sensor to the alarm input terminal of the
camera, the alarm action will be performed when the connected alarm device is activated.
•
VMD alarm: When motion is detected in the set VMD area, the alarm action will be performed.
*VMD stands for "Video Motion Detection".
•
Command alarm: When a Panasonic alarm protocol is received from the connected device via a network,
the alarm action will be performed.
•
Auto track alarm: According to the conditions set in advance, the alarm action will be performed in the
auto tracking operations.
•
Audio detection alarm: When the configured audio detection level is exceeded, the alarm action will be
performed.
1.4.2 Action at an alarm occurrence
Display the alarm occurrence indication button on the "Live" page
The alarm occurrence indication button will be displayed on the "Live" page at an alarm occurrence.
(®page 12)
IMPORTANT
•
When "Polling(30s)" is selected for "Status update mode" (®page 71), the Alarm occurrence
indication button will be refreshed in 30-second intervals. For this reason, it may take a maximum of
30 seconds until the alarm occurrence indication button is displayed on the "Live" page at an alarm
occurrence.
Notify of alarm occurrences to the device connected to the output terminal
It is possible to output signals from the output terminal of the camera and sound the buzzer when an alarm
occurs. The settings for the alarm output can be configured in the [Alarm] tab of the "Alarm" page.
(®page 151)
Save images on the SD memory card
When an alarm occurs, images (JPEG/H.265/H.264) will be saved on the SD memory card. The settings to
save images on the SD memory card can be configured on the [SD memory card] tab (®page 78) of the
"Basic" page and the [Alarm] tab of the "Alarm" page. (®page 153)
Transmit an image onto a server automatically
An alarm image can be transmitted at an alarm occurrence to the server designated in advance. The settings
required to transmit an alarm image to a server can be configured in the "Alarm image" section on the
[Alarm] tab of the "Alarm" page (®page 153) and the [Advanced] tab of the "Network" page (®page 191).
32 Operating Instructions