Table of Contents
Advertisement
2.4.2 Configure the settings relating to the SD memory card [SD
memory card]
Click the [SD memory card] tab on the "Basic" page. (®For menu display and how to operate, refer to
page 34, page 34)
The settings relating to the SD memory card can be configured on this page.
Operating mode
[SD memory card]
Select "Use" or "Not use" to determine whether or not to use the SD memory card.
•
Default: Use
[Remaining capacity notification]
When the E-mail notification function or the Panasonic alarm protocol function is used to provide notification
of the remaining capacity of the SD memory card, select a level to be notified at from the following.
50%/ 20%/ 10%/ 5%/ 2%
•
Default: 50%
Note
•
Notification will be provided each time the remaining capacity goes below each of the specified values.
For example, notification will be provided each time the remaining capacity reaches 50%, 20%, 10%,
5% and 2% when "50%" is selected. Notification may not always be made at the very moment when
the remaining capacity of the SD memory card has reached each value.
•
When "On" is selected for "Overwrite", this setting is gray-out and not available.
[Overwrite]
Determine whether or not to overwrite when the remaining capacity of the SD memory card becomes
insufficient.
2 Settings
Operating Instructions
57
Advertisement
Table of Contents
