Insert/Remove An Sd Memory Card - Panasonic WV-S2570L Important Information Manual

Insert / remove an SD memory card
Note:
⿟ Refer to the Operating Instructions on the Panasonic support website for further information
about the SD memory card settings.
⿟ Refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0107>) for
latest information about the compatible SD memory cards.
■ Insert an SD memory card
【１】
Remove the enclosure from the camera, insert an SD memory card fully into the SD slot until a
click is heard.
⿟Insert the SD memory card with its label facing down.
⿟Insert the SD memory card with its back end at the same height as the lower part of the
center SD guide rib until it makes a clicking sound.
⿟Take your fingers off the SD memory card and check that its back end does not protrude
over the upper part of the SD guide rib.
⿟After the SD memory card has been inserted, press the SD ON/OFF button, and make sure
the SD MOUNT indicator is continually lit.
⿟If you do not press the SD ON/OFF button after inserting the SD memory card, the SD
MOUNT indicator is automatically lit approximately 5 minutes later.
【2】
Attach the enclosure to the camera.
SD MOUNT indicator
SD guide rib
22
SD memory card
(with label facing down)
Back end of the SD
memory card
SD ON/OFF button