Juniper EX9200 Features Manual page 95

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
}
}
}
next-hop-group nhg_mirror_to_bd { # Configure a next-hop group.
group-type layer-2; # Specify 'layer-2' for Layer 2; default 'inet' is for Layer 3.
interface ge-2/0/2.0; # Interface on 'bd_next_hop_group' bridge domain.
interface ge-2/2/9.0; # Interface on 'bd_next_hop_group' bridge domain.
}
}
Configure two Layer 2 port-mirroring firewall filters for
5.
—Sends all
filter_pm_bridge
destination.
—Sends all
filter_redirect_to_nhg
.
nhg_mirror_to_bd
Layer 2 port-mirroring firewall filters for
physical interface configured with encapsulation
[edit]
firewall {
family bridge {
filter filter_pm_bridge {
term term_port_mirror {
then port-mirror;
}
}
filter filter_redirect_to_nhg {
term term_nhg {
then next-hop-group nhg_mirror_to_bd;
}
}
}
}
Understanding Layer 2 Port Mirroring on page 3
Understanding Layer 2 Port Mirroring to Multiple Destinations Using Next-Hop Groups
on page 68
Defining a Layer 2 Port-Mirroring Firewall Filter
Defining a Next-Hop Group for Layer 2 Port Mirroring on page 72
Displaying Next-Hop Group Settings and Status on page 95
Chapter 8: Port Mirroring for Multiple Destinations
family bridge
traffic to the global port mirroring
family bridge
traffic to the final next-hop group
family bridge
traffic applies to traffic on a
family bridge
ethernet-bridge
traffic:
.
79