Juniper EX9200 Features Manual page 53

Copyright © 2016, Juniper Networks, Inc.
... packet-selection-properties-configuration ...
}
family ethernet-switching {
... mirror-destination-properties-configuration ...
}
}
pm_instance_2 {
input {
... packet-selection-properties-configuration ...
}
family ethernet-switching {
... mirror-destination-properties-configuration ...
}
}
}
}
}
NOTE: In this example, no global port-mirroring properties are configured
on the router (or switch).
Apply the Layer 2 port mirroring instances to the same group of ports in the router (or
2.
switch) chassis. In this example, the named instances of Layer 2 port mirroring are
applied to the same group of physical interfaces specified at the PIC level of the
chassis:
[edit]
chassis {
fpc 2 {
pic 0 {
port-mirror-instance pm_instance_1;
port-mirror-instance pm_instance_2;
}
}
}
Note that, in this example, two named instances of Layer 2 port mirroring are bound
to the PIC level of the chassis at the same group of ports.
Chapter 6: Port Mirroring for Physical Interfaces
37