Show Forwarding-Options Port-Mirroring; Table 11: Show Forwarding-Options Port-Mirroring Output Fields - Juniper EX9200 Features Manual

Port Mirroring Feature Guide for EX9200 Switches

show forwarding-options port-mirroring

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 11: show forwarding-options port-mirroring Output Fields

Field Name
Instance Name
Instance Id
State
Input parameters
Rate
Run-length
Maximum-packet-length
Output parameters
Family
State
Destination
410
show forwarding-options port-mirroring
<terse | detail>
<instance-name>
Command introduced in Junos OS Release 9.6.
Command introduced in Junos OS Release 12.3R2 for EX Series switches.
Display current state of port-mirroring instances.
—(Optional) Display the specified level of output.
terse | detail
—(Optional) Display a single port-mirroring instance.
instance-name
view
show forwarding-options port-mirroring terse on page 411
show forwarding-options port-mirroring detail on page 411
Table 11 on page 410 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Field Description
Name of port-mirroring instance.
Instance identification number.
Instance state, either or
up
Rate (ratio of packets sampled).
Run length (number of consecutive packets sampled).
Maximum packet length.
Protocol family.
Instance state, either or
up
Destination (next-hop group name).
show forwarding-options port-mirroring
.
down
.
down
Level of Output
All levels
All levels
All levels
detail
detail
detail
detail
detail
detail
Copyright © 2016, Juniper Networks, Inc.