Behavior Of Layer 2 Port Mirroring Of Logical Interfaces On Pe Routers; Layer 2 Port Mirroring Of Pe Router Or Pe Switch Logical Interfaces - Juniper EX9200 Features Manual

Port mirroring feature guide ex series

Hide thumbs Also See for EX9200:

Table of Contents

Behavior of Layer 2 Port Mirroring of

Logical Interfaces on PE Routers

Layer 2 Port Mirroring of PE Router or PE Switch Logical Interfaces on page 13

Layer 2 Port Mirroring of PE Router or PE Switch Aggregated Ethernet

Interfaces on page 15

For a router or switch configured as a provider edge (PE) device on the customer-facing

edge of a service provider network, you can apply a Layer 2 port-mirroring firewall filter

at the following ingress and egress points to mirror the traffic between the router or

switch and customer edge (CE) devices, which are typically also routers and Ethernet

Table 4 on page 14

describes the ways in which you can apply Layer 2 port-mirroring

firewall filters to a router or switch configured as a PE device.