Juniper EX9200 Features Manual page 408

Port Mirroring Feature Guide for EX9200 Switches
392
Table 10: show chassis pic Output Fields (continued)
Field Name
State
PIC version
Uptime
Package
Port Number
Cable Type
PIC Port Information
(MX480 Router 100-Gigabit
Ethernet CFP)
PIC Port Information
(MX960 Router
Bidirectional Optics )
Field Description
Status of the PIC. State is displayed only when a PIC is in the slot.
— PIC is online and running.
Online
—PIC is powered down.
Offline
PIC hardware version.
How long the PIC has been online.
(Multiservices PICs only) Services package supported:
.
Layer-3
Port number for the PIC.
Type of cable connected to the port:
Port-level information for the PIC.
Port—Port number
Cable type—Type of optical transceiver installed.
Fiber type—Type of fiber. SM is single-mode.
Xcvr vendor—Transceiver vendor name.
Xcvr vendor part number—Transceiver vendor part number.
Wavelength—Wavelength of the transmitted signal. Uplinks and
downlinks are always 1550 nm. There is a separate fiber for each
direction
Xcvr Firmware—Transceiver firmware version.
Port-level information for the PIC.
Port—Port number
Cable type—Type of small form-factor pluggable (SFP) optical
transceiver installed. Uplink interfaces display -U. Down link
interfaces display -D.
Fiber type—Type of fiber. SM is single-mode.
Xcvr vendor—Transceiver vendor name.
Xcvr vendor part number—Transceiver vendor part number.
BX10-10-km bidirectional optics.
BX40-40-km bidirectional optics.
SFP-LX-40-km SFP optics.
Wavelength—Wavelength of the transmitted signal. Uplinks are
always 1310 nm. Downlinks are either 1490 nm or 1550 nm.
Layer-2
, , or
LH LX SX.
Copyright © 2016, Juniper Networks, Inc.
or