Routing For Application #4; Mic Inputs 1 - 8; Program L/R Inputs 9 And 10; Usb Communications Input 11 - Extron electronics MediaPort 200 User Manual

Audio application tutorial
Hide thumbs Also See for MediaPort 200:
Table of Contents

Advertisement

Routing for Application #4

Mic Inputs 1 – 8

Program L/R Inputs 9 and 10

Program content comes from the MediaPort 200 Line Output L/R, which is a mix of the
USB Playback, HDMI, and Line Input signals.

USB Communications Input 11

"Far end" audio from a soft codec conference is received at the MediaPort's USB
Communications input and is sent to the MediaPort 200 Ref Out.
Microphone inputs are routed to the Virtual Send A, using the "Include Automixing"
routing option.
From Virtual Return A, the Mic Mix is routed to Output 3. DMP 128 Output 3 is
connected to the MediaPort 200 Mic/Line Input.
In the DMP 128 AEC processing dialog, "AEC Ref (Virtual Return #H)" is assigned as
the AEC reference for mic inputs 1 – 8.
Virtual Return A is also routed to Output 4, connected to the video codec.
MediaPort 200 Line Output L/R is connected to the DMP 128 Inputs 9 and 10 "MP
Program L/R."
DMP 128 Inputs 9 and 10 are routed to Output 4, summed to mono. Output 4 is
connected to the video codec.
The mix‑points that connect Inputs 9 and 10 to Output 4 are set to ‑12dB. This is to
compensate for summing, which can add up to 6dB of gain, and also to set a mix level
for program audio to the video codec far end. This gain setting can be adjusted further
during a test call to the video codec.
DMP 128 Inputs 9 and 10 are routed to Virtual Sends B and C.
From Virtual Returns B and C, program audio is routed to Outputs 1 and 2, and then
connected to a stereo sound reinforcement system in the room. Virtual Returns B and
C are also routed to Virtual Send H for the AEC reference.
MediaPort Ref Out is connected to DMP 128 Input 11 "MP Far End."
DMP 128 Input 11 is routed to Output 4. Output 4 is connected to the video codec.
DMP 128 Input 11 is routed to Virtual Send D.
From Virtual Return D, USB Communcations is routed to Outputs 1 and 2, and then
connected to the sound reinforcement system in the room. Virtual Return D is also
routed to Virtual Send H for the AEC reference.
MediaPort 200 Audio Application Tutorial • Configurations for DMP 128
24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MediaPort 200 and is the answer not in the manual?

Table of Contents