Power Supply Considerations; Power Connection Guidelines - Cisco ASR-920-20SZ-M Hardware Installation Manual

Aggregation services router
Hide thumbs Also See for ASR-920-20SZ-M:
Table of Contents

Advertisement

Power Supply Considerations

• Carefully examine your work area for possible hazards, such as moist floors, ungrounded power extension
• Never assume that power is disconnected from a circuit; always check.
• Never perform any action that creates a potential hazard to people or makes the equipment unsafe.
• If an electrical accident occurs and you are uninjured:
Use the following guidelines when working with any equipment that is disconnected from a power source,
but connected to telephone wiring or network cabling:
• When installing or modifying telephone lines, use caution.
• Never install telephone jacks in wet locations unless the jack is designed to handle such locations.
• Never install telephone wiring during a lightning storm.
Power Supply Considerations
Check the power at your site to ensure that you are receiving clean power (free of spikes and noise). If
necessary, install a power conditioner.

Power Connection Guidelines

This section provides guidelines for connecting the device power supplies to the site power source.
Warning
This equipment is intended to be grounded to comply with emission and immunity requirements. Ensure that
the switch functional ground lug is connected to earth ground during normal use. Statement 1064
Warning
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019
Warning
This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations. Statement 1045
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
6
cables, and missing safety grounds.
• Use caution to avoid injuring yourself.
• Turn off power to the device.
• If possible, send another person to get medical aid. Otherwise, determine the condition of the victim,
and then call for help.
• Determine whether the person needs rescue pulsing or external cardiac compressions; then take
appropriate action.
Safety Warnings

Advertisement

Table of Contents
loading

Table of Contents