B-ALU Extern 180 Instructions For Installation And Use Manual page 77

2. System data
1. Address of the operating agency: _______________________________________
______________________________________
Place where the system is operated: _______________________________________
2. Designation: _________________________________________ Type: ______
Serial number: _________________________ year of manufacture: __________
Comissioned on: _______________________
3. Wing
Manufacturer or supplier: ______________________________________________
Dimensions: ____________________________ Material: ____________________
Wing filling: _________________________________________________________
4. Drive
Manufacturer or supplier: ______________________________________________
Type: _______________________________ Power: ________________________
Operating voltage: ____________________ Control voltage: _________________
5. Control
Type of control (e.g. button, dead-man's control, remote control, light barrier,
hand-held transmitter or induction loop): _________________________________
____________________________________________________________________
6. Safety mechanism of the main locking edge
Switching bar, locking edge security and force restriction
Contact-less safety devices, e.g. light grid, light barrier or radar
Miscellaneous: _______________________________________________________
7. Additional safeguards against damage to property (e.g. light barrier in the
passageway)
8. Other information: ___________________________________________________
____________________________________________________
3. List of testes for power-operated sliding gates
Designation: _________________________________________
Type: _______________________________________________ Serial number: ____________________
Year of manufacture: __________________________________ Supplier: _________________________
Colour: _____________________________________________ Motor type: ______________________
0.0 Basic testing
0.1 Visual impression
0.2 Test opening
0.3 General functionality
0.4 Nameplate
0.4 CE marking
1.0 Mechanical System
1.1 Wing, wing filling
1.2 Guides, runner rails, bars
and stops
1.3 Rollers, roller mechanisms
and covers
1.4 Suspension of the wing
2.0 Drives
2.1 Drive fixture
2.2 Air-tightness of the gearbox
housing
2.3 Braking effect, trailing
distance
2.4 Slip clutch
2.5 Condition of the electrical
lines and connections
2.6 Power transmission (pinion)
2.7 Mechanism for manual
operation
2.8 decoupling
Test conducted on:
Schedule fort he next test:
____________________________
Test person's signature
ENGLISH
3.0 Control
3.1 Control elements, push
buttons, key switches
3.2 Limit switches
3.3 Emergency stop buttons
3.4 Equipment for remote control
3.5 Inductions loops
4.0 Safety mechansim
4.1 Electrical switching rails
4.2 Force restriction
4.3 Dead-man's control
4.4 Contact-less safety equipment
and devices
4.5 Safety clearances between the
wing and fixed items in the
surrounding area
5.0 Test findings
___________________________________
___________________________________
________________________
Customer's signature
36