B-ALU Extern 180 Instructions For Installation And Use Manual page 62

Get a hand-held transmitter to learn or delete each one separately:
SAVING
OK
DELETION [n...]
Activation 1
DELETION [n...]
Activation 2
DELETION [n...]
CODE saved
DELETION
OK
DELETION [n...]
Activation 1
DELETION [n...]
Activation 2
DELETION [n...]
CODE saved
Delete all hand-held transmitters from the wireless receiver:
TOTAL DELETION
OK
SAVE DELETION?
OK
DELETION IN
PROGRESS
Specify what a wireless command should do:
CHANNEL FUNCTIONS
OK
CHANNEL A
COMMAND
TD/TAL/TA/TC
BLOCK/OUTPUT CH2
NO COMMAND
CHANNEL B
COMMAND
TD/TAL/TA/TC
BLOCK/OUTPUT CH2
NO COMMAND
CHANNEL C
COMMAND
TD/TAL/TA/TC
BLOCK/OUTPUT CH2
NO COMMAND
CHANNEL D
COMMAND
TD/TAL/TA/TC
BLOCK/OUTPUT CH2
NO COMMAND
Press the button on the hand-
held transmitter that needs to
be deleted
Press the button to be deleted
once again to confirm
The controller confirms that
the hand-held transmitter has
been deleted
Press the button on the hand-held
transmitter that needs to be
deleted
Press the button to be deleted
once again to confirm
The controller confirms that the
hand-held transmitter has been
deleted
Use "PROG/OK" to confirm that
the entire wireless receiver
needs to be deleted
1. wireless command acts as the
dynamic start, pedestrian feature
specification for open or close, as
stop, 2nd wireless channel (terminals
9 – 10)
2. wireless command acts as the
dynamic start, pedestrian feature
specification for open or close, as
stop, 2nd wireless channel (terminals
9 – 10)
3. wireless command acts as the
dynamic start, pedestrian feature
specification for open or close, as
stop, 2nd wireless channel (terminals
9 – 10)
4. wireless command acts as the
dynamic start, pedestrian feature
specification for open or close, as
stop, 2nd wireless channel (terminals
9 – 10)
ENGLISH
21