Description Of The Operation And Use - B-ALU Extern 180 Instructions For Installation And Use Manual

4.

Description of the operation and use

4.1. General
ATTENTION! Do not insert any objects whatsoever between the parts of the gate or do not place them on or over the gate
while it is in motion under any circumstances.
Always be at a distance from the gate while it is in motion!
It is strictly prohibited to ride along with the gate!
4.2. Shutting down the gate system
4.2.1. Inline
1
STEP
Open the pillar via
the lock located on
its outside. In order
to interrupt the gate
automatic system,
first pull out the plug
from the wall socket
and then remove the
rechargeable battery connector from the control board.
ATTENTION! DANGER TO LIFE by electric current!
4.2.2. Extern
1
STEP
Open the pillar via the
lock located on its
outside. In order to
interrupt the gate
automatic system,
first pull out the plug
from the wall socket
and then remove the
rechargeable battery
con-nector from the control board.
ATTENTION! DANGER TO LIFE by electric current!
2
STEP
1. Release the lock
between the gate and the
motor with the help of
the emergency locking
lever on the motor.
2. The gate can now be
moved by hand.
ATTENTION! Check that
the product is electrically de-energized!
When moving the gate by hand, take potential crushing hazards
for persons, animals and objects into account!
2
STEP
To release the unit
1. Rotate the lock protection disk, insert the
key, rotate it half a turn anticlockwise and lift
up the knob cover. The knob is now free and
can be released.
2. Rotate the knob clockwise until it can turn
no more. Attention: do not force the knob to turn further than its
travel limit. The gears are now released and the gate can be moved
manually.
ATTENTION! Check that the product is electrically deenergized!
When moving the gate by hand, take potential crushing hazards
for persons, animals and objects into account!
ENGLISH
12