B-ALU Extern 180 Instructions For Installation And Use Manual page 54

4.3. Adjusting the product
Adjust the product in accordance with its specific usage requirements. In this way, it is possible, for example, to set the gate to fully auto-
matic or semi-automatic mode of operation – the pause time can be adjusted and even the gate movement feature can be activated.
Information on these settings is given in the manual for the drive with controller.
4.4. Operation
Always ensure that the gate works smoothly and properly while opening and closing.
Detailed description, for example, for the programming is included in the manual supplied along with the drive with control-ler.
Attention! Whenever the gate is set to the "automatic closing" mode, special hazard analysis must be carried out prior to acti-vation.
Unlock the gate in case of power failure with the help of the locking grip on the motor and move the gate by hand.
1
STEP
Use the left button on the remote control unit to open the gate completely. If the gate is set to semi-
automatic mode of operation, the left button must also be used to close the gate.
2
STEP
Use the right button of the remote control unit to use the gate movement feature. If the gate is set
to semi-automatic mode of operation, the left button must also be used to close the gate .
ENGLISH
13