Install The Discharge Pipe Onto The Pump; Installation Of The Gasket - Zoeller 105 Installation Instructions Manual

STEP 2
WEEP HOLE
Figure 2.1
STEP 3
3.1) Install the gasket into the "gasket seat" at the top of
the basin.
FOAM GASKET
Install the Discharge Pipe onto the Pump ( All Models)

Installation of the Gasket

© Copyright 2017 Zoeller
DISCHARGE PIPE
IMPORTANT!
IS NOT DIRECTED TOWARD THE FLOAT!
Water stream will be visible from this hole during
pump run periods.
PUMP DISCHARGE
SK2002
OVERLAP DETAIL
GASKET SEAT
Figure 3.1
Co. All rights reserved.
®
5
BE SURE THAT WEEPHOLE
APPROXIMATELY 1/4" OVERLAP
GASKET SEAT DETAIL
FOAM GASKET
BASIN
SK3160