Zoeller 1073Q Quick Reference Manual

ZoellerAtHome.com
QUICK REFERENCE GUIDE.
SEE INSTRUCTION MANUAL
FOR COMPLETE DETAILS.
WARNING:
FOR YOUR PROTECTION, ALWAYS DISCONNECT
PUMP FROM POWER SOURCE BEFORE HANDLING.
2. Install rigid 1-1/2 in. discharge pipe, union,
check valve according to code.
4. Connect pump power supply to a
GFCI-protected receptacle.
Zoeller is a registered trademark of Zoeller Co. All Rights Reserved.
®
SUBMERSIBLE
SUMP PUMP
MODEL #1073Q, 1075Q
1-1/2-in
Discharge
pipe
Check valve
GFCI outlet
18 in.
1. Place pump in a sump basin that is at least
10 in. wide and 18 in. deep.
3/16-in
Vent hole
3. Drill a 3/16 in. hole in the discharge pipe,
level with the top of pump. Connect remaining
discharge pipe into main discharge line.
Fill with
water
5. Fill the basin with water to check operation.
Install a basin cover and gasket on top of
the basin.
10 in.
Basin cover
SW1140Q A