Zoeller 1052Q Quick Reference Manual

English Toll Free Help Line
1-800-584-8089
ZoellerAtHome.com
QUICK REFERENCE GUIDE.
SEE INSTRUCTION MANUAL
FOR COMPLETE DETAILS.
WARNING:
FOR YOUR PROTECTION, ALWAYS DISCONNECT
PUMP FROM POWER SOURCE BEFORE HANDLING.
2. Install rigid 1-1/2 in discharge pipe, union, check
valve according to code.
4. Connect pump power supply to a GFCI-protected
receptacle.
Zoeller is a registered trademark of Zoeller Co.
®
All Rights Reserved.
SUBMERSIBLE
SUMP PUMP
MODEL #1052Q, 1096Q
1-1/2-in
Discharge
pipe
Check valve
GFCI outlet
18 in.
1. Place pump in a sump basin that is at least 10 in wide
and 18 in deep.
Additional
3/16-in
Vent hole
3. Drill a 3/16 in hole in the discharge pipe, level with the
top of pump. Pumps have a vent located in the pump,
but an additional vent hole is recommeded. Connect
remaining discharge pipe into main discharge line.
Fill with
water
5. Fill the basin with water to check operation. Install a
basin cover and gasket on top of the basin.
10 in.
Vent hole
located in
the pump
housing
Basin cover
SW1311Q A