Zoeller 1043-0006Q Manual

Zoeller 1043-0006Q Manual

Automatic submersible utility pump
Hide thumbs Also See for 1043-0006Q:

Advertisement

Quick Links

ZoellerAtHome.com
ZoellerAtHome.com
Zoeller
is a registered trademark of
®
Zoeller Co. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-584-8089, 7:30 a.m. - 5:00 p.m., EST, Monday - Friday.
Purchase Date
1
SUBMERSIBLE UTILITY
SUBMERSIBLE UTILITY
AUTOMATIC
AUTOMATIC
PUMP
PUMP
MODEL 1043-0006Q
Español p. 9

Advertisement

Table of Contents
loading

Summary of Contents for Zoeller 1043-0006Q

  • Page 1 ZoellerAtHome.com ZoellerAtHome.com Zoeller is a registered trademark of MODEL 1043-0006Q ® Zoeller Co. All Rights Reserved. Español p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-584-8089, 7:30 a.m. - 5:00 p.m., EST, Monday - Friday.
  • Page 2: Package Contents

    PACKAGE CONTENTS DESCRIPTION QUANTITY Pump Adapter PERFORMANCE GALLONS PER HOUR AT DISCHARGE HEIGHT ITEM ABOVE PUMPING LEVEL AMPS NUMBER 0 FT. 5 FT. 10 FT. 15 FT. 20 FT. 1043 2400 2100 1680 1380 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product.
  • Page 3 WARNING • ELECTRICAL SHOCK ALERT. Before installing this product, have the electrical circuit checked by an electrician to ensure proper grounding. All electrical installations must conform to the National Electric Code and all local WARNING WARNING codes. • • ELECTRICAL SHOCK ALERT. ELECTRICAL SHOCK ALERT.
  • Page 4: Installation Instructions

    PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 5 minutes No Tools Required for Assembly. INSTALLATION INSTRUCTIONS 1.
  • Page 5: Gfci Outlet

    3. Plug pump into a properly grounded 115V AC power outlet. GFCI Outlet RESET TEST OPERATION 1. Set pump on hard surface in water before starting. Water must be a minimum of 1-3/4-in deep for pump to operate. The pump will run for 15 seconds after it is plugged in. If water is being pumped during this 15 seconds, the pump will continue operating until water level drops to 1-3/4-in...
  • Page 6: Care And Maintenance

    CARE AND MAINTENANCE The motor housing of pump is completely sealed and requires no service. Disassembly of the motor housing or alteration of the power cord voids all warranty. 1. Periodically unplug pump to inspect the inlet and remove any debris. Make sure your hands are Unplug dry and that you are not standing in water.
  • Page 7: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Pump runs, 1. Hose kinked. 1. Straighten hose. but no water is 2. Defective pump. 2. Replace pump. discharged. 3. Discharge height too great. 3. Reduce discharge height. 4. Clogged inlet. 4. Clean inlet. Motor runs too hot.
  • Page 8: Warranty

    WARRANTY This product is warranted for two years from the date of purchase. Subject to the conditions hereinafter set forth, the manufacturer will repair or replace to the original consumer, any portion of the product which proves defective due to defective materials or workmanship. This warranty does not cover replacement parts for failure due to normal wear and tear.

Table of Contents