Headlamp Aiming - Mitsubishi PAJERO IV Service Manual

NOTE: For the specified oil, refer to GROUP 2,
Periodic Inspection and Maintenance.
41. HOSES, FLUID LINES AND
CONNECTIONS LOCATED UNDER
VEHICLE

42. HEADLAMP AIMING

Screen
Level surface
Check condition for headlamp aiming.
NOTE: For headlamp aiming procedures, refer to the
Workshop Manual for that model.
43. EQUIPMENT
PRE-DELIVERY INSPECTION
FINAL STEPS
M6010901000145
AC305647
FINAL STEPS
M6011000100116
Headlamp
AC305648
AB
M6011000200050
AC305649
1. Check all hoses, fluid lines and connections for
leaks.
2. Check all hoses and fluid lines for proper routing
away from sharp edges and moving components.
Check the installation of the various equipment.
1. Floor mats
2. Spare tyre
3. Jack, jack handle and tool set
44. EXTERIOR AND INTERIOR
Finally check and clean the exterior and interior.
1. Wash the vehicle to remove all traces of road
grime and other dirt on the vehicle as a result of
new vehicle preparations.
2. Clean exterior and interior glass surface.
3. Remove all protective covers.
4. Remove undercoat overspray, excess window
sealer, and excess weatherstrip adhesive.
5. Verify that the secondary key can not unlock the
glove box and tailgate/boot lid (if so equipped).
6. Remove shipping and inspection stickers.
45. OWNER INSTRUCTIONS
1. Verify that the owner's manual and service
booklet is in the glove box.
2. Place the spare keys in envelope in the glove box
before delivery.
1-17
M6011000300187
M6011000400054