Table of Contents
Advertisement
Installing the unit
Deciding on where to install the unit
f Install the unit in indoor and do not install it outside . The unit is designed only for indoor .
f
f Direct heat can make the kit have some failures in operation .
f
f Choose locations that are dry and sunny, but not exposed to direct sunlight or strong winds .
f
f Choose location where pipes and cables can be easily connected to the indoor unit .
f
f Avoid locations where flammable elements and explosive chemicals are stored .
f
f Choose a specific wall which can withstand the weight of unit and an external force .
f
Mounting the unit
1 . Remove 2 bolts from the unit .
2 . Open the top cover and install 4 screws on the wall .
3 . Close the top cover and install 2 bolts again into the unit .
Installing the remote controller
Dimension
EHS Control unit_MIM-E03@_IM_E_34413-2.indd 5
Procedure
Remark
Bolt
(Unit : mm)
5
2012-04-05 오후 1:19:56
Advertisement
Table of Contents
