Sentry The Guardimals Owner's Manual page 84

10.0 Operation and Adjustments
- From back of car seat, pull Harness
Straps through the Harness Strap Slots
in back support until you have enough
strap to reach the Belt Adjuster Plate
- Feed one Harness Strap End onto the Harness Strap
Connector Plate
End onto the Connector Plate
Harness Strap Ends are not twisted and are securely
connected to the Harness Strap Connector Plate
3
- Inspect the Harness Straps from the front and back of the car
seat to ensure that they are not twisted. Twisted harness straps
can prevent proper tightening of the harness and thus may
not adequately restrain your child in a sharp turn, sudden stop
or crash. Before Using the car sat, please pull on the harness
straps from the front of the car seat to ensure they are securely
re-attached.
2
then feed the other Harness Strap
3
2
85
1
.
. Ensure that the
4
1
4
.