7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
9.
Place knee inside seat
down, pull on the free end of the LATCH
lower anchor belt to tighten the LATCH
lower anchor belt around the Car Seat
10. Check for a secure installation by grasping
the car seat armrest and pushing side-to-side
and front-to-back. The car seat should not
move more than 1 inch in either direction.
• If the car seat moves more than
1 inch, retighten the LATCH belt
and test again.
• If the car seat moves less than 1 inch,
installation is complete. However if the
car seat still moves more than 1 inch,
try another seating position or see the
"Vehicle Seat Belts" section and check
your vehicle owner's manual for
information on securing car seats.
1
and while pressing
44
2
.
2
1