Sentry The Guardimals Owner's Manual page 42

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
3. Adjust the harness strap height for your
child – Harness straps MUST be at or
above the child's shoulders (see
"Changing Harness Strap Height" section).
4. Route the LATCH lower anchor belt using
the "REAR ENTRY" belt routing as shown
in Section 7.2.
5. Place the car seat on the vehicle seat in
a seating location equipped with LATCH
and centered between the LATCH
anchorages (see "Selecting a Vehicle
Seating Location" section).
6. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner's manual
for use with a car seat.
7. Attach the LATCH connectors on the
Lower Anchor Belt to the vehicle LATCH
anchorages
when the connectors lock onto the vehicle
anchorage.
8. Pull to check that the
connectors are securely
3
attached
1 2
and . Listen for the "click"
.
43
REAR
ENTRY
Belt
Routing
LATCH
Connector