Harness Removal And Assembly - Sentry The Guardimals Owner's Manual

10.0 Operation and Adjustments
d. Inspect the Harness Straps from the front and back of the car
seat to ensure that they are not twisted. Twisted harness straps
can prevent proper tightening of the harness and thus may not
adequately restrain your child in a sharp turn, sudden stop or crash.
Before Using the car sat, please pull on the harness straps from the
front of the car seat to ensure they are securely re-attached.

10.4 Harness Removal and Assembly

Harness Removal:
b. Buckle harness and chest clip to
hold harness system together.
b. Loosen harness straps by depressing the
Harness Adjuster
harness straps
c. From the back of the car seat, locate the
Harness Connector Plate and remove both
Harness Straps from the Harness Connector
Plate. Be sure to note how the Harness Straps
are attached to assist in reattaching.
d. From front of car seat, pull Harness Straps out
of Harness Strap Slots and out through front of
car seat.
1
and pull out on the
2
.
81
2
1