Top; Tether - Sentry The Guardimals Owner's Manual

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
7. Pull the vehicle Lap belt out and route
through the car seat using the " FRONT
ENTRY" belt routing as shown in Section
7.2 and buckle the vehicle seat belt.
8. Pull to check that the vehicle buckle
is securely locked.
NOTE: If Lap belt is not long enough
and LATCH system is not
available, install Car Seat using
"REAR ENTRY" belt path, (see
"Installation - Lap Belt Only
Without Top Tether" section).
9. Place knee inside seat and while pressing
1
down , pull on the free end of the vehicle
2
lap belt
the car seat.
10. Attach Top Tether Hook to vehicle tether
anchor 1
when the tether hook locks onto the
vehicle tether anchor.
11. Pull on the Top Tether Strap to check that
the Tether Hook is securely attached
12. Pull on free end of Top Tether Strap
until all slack is removed from the
To p Tether
to tighten the lap belt around
and 2 . Listen for the "click"
.
4
FRONT
ENTRY
Routing
3 .

Tether

Adjuster
39

Top

Tether
Belt
2
1
2
3
1
4