Sentry The Guardimals Owner's Manual page 78

10.0 Operation and Adjustments
The harness can be adjusted to three different heights. The proper height
of the harness straps is at or just above your child's shoulders. If your
child's shoulders are between two levels, always use the higher of the
two. Remove the body insert if your child's shoulders are above the
highest set of harness slots.
To adjust harness strap height, remove harness straps from back
support, move to height at or just above child's shoulder and re-attach
harness straps.
Follow the instructions very closely to ensure that the harness is
properly adjusted to fit your child at all times. Check the fit of the
harness every time you use the Car Seat.
To remove Harness Straps from Back Support:
a. Loosen the Harness Straps by depressing
the Harness Adjuster
Harness Straps
b. From the back of the car seat, locate the
Harness Strap Connector Plate and remove
both Harness Straps from the Harness Strap
Connector Plate. Be sure to note how the
Harness Straps are attached to assist in
reattaching.
c. From front of car seat, pull Harness Straps out
of Harness Strap Slots and out through front of
car seat.
1
and pull out on the
2
.
79
2
1