Sentry The Guardimals Owner's Manual page 32

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
To remove car seat:
1.
Loosen Top Tether by pressing the button
on Tether Adjuster and sliding belt through
adjuster
1
2.
Unhook Top Tether Hook from vehicle tether
anchor. Press up on retainer
Tether Hook
3.
Loosen LATCH lower anchor belt by
putting knee in seat and while pressing
1
down , press the button on LATCH
Adjuster and slide belt through
adjuster 2
4.
Unhook LATCH lower anchor belt connectors
from vehicle anchors. Press up on retainer
unhook Tether Hook
NOTE: When removing the LATCH
connector, rotating the connector
90º can asist in removal from
vehicle anchor.
.
, and remove
3
.
2 , and remove
2 , unhook
.
4
1
3
.
33
4
3
2
2
,
3
1
1
2
1