Installation Without Top Tether "Rear Entry" Belt Routing - Sentry The Guardimals Owner's Manual

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
Installation
"REAR ENTRY" Belt routing
The "REAR ENTRY" belt routing is used to secure the Toddler Car Seat
(WITH Harness) when installed
lower anchor belt and vehicle seat belts are routed through the " REAR
ENTRY" belt path in the same way.
"REAR ENTRY" Belt Routing
• From the rear of the car seat,
insert the LATCH connector or
the vehicle seat belt latch plate
into the Belt Path Opening in the
Back Support
• Pull the LATCH or vehicle seat
belt through the Belt Path Opening
and across the front of Back
Support to the Belt Path Opening
on the opposite side
• From the front of the Back
Support, insert the LATCH
connector or the vehicle seat belt
latch plate into the Belt Path Opening
in the Back Support and pull the
LATCH or vehicle seat belt through
Note: Store tether on back of seat when not in use
as shown on page 41.
WITHOUT Top Tether
1
.
2
.
WITHOUT the Top Tether. The LATCH
1
3
.
27
Back
Support
Belt Path
Openings
2
3