Attach Top Tether Hook To Vehicle Tether; Pull On The Top Tether Strap To Check That The Tether Hook Is Securely Attached; Pull On Free End Of Top Tether Strap Until All Slack Is Removed From The Top Tether - Sentry The Guardimals Owner's Manual

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
12. While holding the lap belt tight, pull slack out
of shoulder belt and allow retractor to tighten
sh oulder belt.

13. Attach Top Tether Hook to vehicle tether

an chor 1 and
th e tether hook locks onto the vehicle tether
anchor.
14. Pull on the Top Tether Strap to check that
th e Tether Hook is securely attached
15. Pull on free end of Top Tether Strap until
al l slack is removed from the Top Tether
16. Check for a secure installation by grasping
th e car seat armrest and pushing side-to-side
an d front-to-back. The car seat should not
m ove more than 1 inch in either direction.
• If the car seat moves more than 1 inch,
retighten the vehicle seat belt and Top
Tether and test again.
• If the car seat moves less than
1 inch, installation is complete.
However if the car seat still
moves more than 1 inch, try
another seating position
or see the "Vehicle Seat
Belts" section and check
your vehicle owner's
manual for information
on securing car seats.
2 . Listen for the "click" when
36
3
.
4
.
2
Tether
Adjuster
1
4
3