Place Knee Inside Seat - Sentry The Guardimals Owner's Manual

Table of Contents

Advertisement

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
6. If the vehicle seat back is adjustable,
adjust into the upright position or the
position specified in the vehicle o wner's
manual for use with a car seat.
7. Pull the vehicle Lap/Shoulder belt out
and route through the car seat using the
"FRONT ENTRY" belt routing as shown
in Section 7.2 and buckle the vehicle seat
belt.
8. Pull to check that the vehicle buckle is
securely locked.
9. Move the vehicle shoulder belt
on the side of the Car Seat
nearest the vehicle buckle
up and over the top of the armrest
and route it through the Toddler
Shoulder Belt Guide.
10. For vehicles with switchable retractors,
pull the shoulder belt all the way out to
switch the retractor into the locking retractor
mode and release the shoulder belt allowing
it to retract.
11. Place knee inside seat and while pressing
1
down
, pull on the vehicle shoulder belt just
above vehicle buckle
lap belt around the car seat.
2
to tighten the vehicle
35
Top
Tether
FRONT
ENTRY
Belt
Routing
2
1

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Sentry The Guardimals

Table of Contents