Sentry The Guardimals Owner's Manual page 39

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
13. Check for a secure installation by grasping
the car seat armrest and pushing side-to-side
and front-to-back. The car seat should not
move more than 1 inch in either direction.
• If the car seat moves more than 1 inch,
retighten the vehicle seat belt and Top
Tether and test again.
• If the car seat moves less than 1 inch,
installation is complete. However if the
car seat still moves more than 1 inch,
try another seating position or see the
"Vehicle Seat Belts" section and check your vehicle
owner's manual for information on securing car seats.
To remove car seat:
Loosen Top Tether by pressing the button
1.
on Tether Adjuster and sliding belt through
1
adjuster
2. Unhook Top Tether Hook for vehicle tether
anchor. Press up on retainer
Tether Hook
3. Unbuckle vehicle seat belt and remove
seat belt from belt path.
.
3 , and remove
2
, unhook
.
4
40
4
1
3
2