Sentry The Guardimals Owner's Manual page 29

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
3. Route the LATCH lower anchor belt using
the "FRONT ENTRY" belt routing as shown
in Section 7.2.
4. Place Top Tether Strap over the top of
the Head Support and rest inside seating
area.
5. Place the Car Seat on the vehicle seat in
a seating location equipped with LATCH
and centered between the LATCH
anchorages (see "Selecting a
Vehicle Seating Location" section).
6. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner's
manual for use with a car seat.
7. Attach the LATCH connectors on the
Lower Anchor Belt to the vehicle LATCH
anchorages
"click" when the connectors lock onto
the vehicle anchorage.
8. Pull to check that the connectors
are securely attached
1 2
and . Listen for the
3
.
FRONT
ENTRY
Routing
Top
Tether
1
2
3
30
Top
Tether
Belt
LATCH
Connector