Belt Routing Options For Installation; Installation With Top Tether "Front Entry" Belt Routing - Sentry The Guardimals Owner's Manual

7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use

Belt Routing Options for Installation:

7.2
Installation
"FRONT ENTRY" Belt Routing
The "FRONT ENTRY" belt routing is used to secure the toddler
Car Seat ( WITH
LATCH lower anchor belt and vehicle seat belts are routed through the
"FRONT ENTRY" belt path in the same way.
"FRONT ENTRY" Belt Routing
• Start by sliding the LATCH belt
or vehicle seat belt under the
1
Armrest .
• From the front of the car seat,
insert the LATCH connector or
the vehicle seat belt latch plate
into the Belt Path Opening in the
Back Support
• Pull the LATCH or vehicle seat
belt through Belt Path Opening
and across the back of Back
Support to the Belt Path Opening
on the opposite side
• From the back of the Back Support, insert the LATCH connector or
the vehicle seat belt latch plate into the Belt Path Opening in the
Back Support
• Pull the LATCH or vehicle seat belt through and slide the belt under
the Armrest on the opposite side
WITH Top Tether
Harness) when installed
2
.
3
.
4
.
WITH the Top Tether. The
Top
Tether
Armrest
2
1
5
.
26
Support
Openings
3
4
5
Back
Belt Path