7.0 Toddler Car Seat ( With Built-in
Harness) Installation and Use
5. Place the car seat on the vehicle seat in
a seating location and centered between
the Lap belt anchorages (see "Selecting
a Vehicle Seating Location" section).
5. If the vehicle seat back is adjustable, adjust
into the upright position or the position
specified in the vehicle owner's manual
for use with a car seat.
6. Pull the vehicle lap belt out and route
through the car seat using the " REAR
ENTRY" belt routing as shown in
Section 7.2 and buckle the vehicle
seat belt.
7. Pull to check that the vehicle buckle is
securely locked.
8. Place knee inside seat and while pressing
1
down
, pull on the free end of the vehicle
lap belt to tighten the lap belt around the
2
Car Seat
.
50
REAR
ENTRY
Belt
Routing
2
1