Operator Responsibility - Safety Recommendations - Julabo F12-MC Operating Manual

Operating manual
Operator responsibility – Safety recommendations
The products of JULABO Labortechnik GmbH warrant a safe operation if installation,
operation and maintenance is carried out according to common safety regulations. This
section informs you about potential dangers that may arise from operating the circulator
and also mentions the most important safety precautions
Persons:
The operator is responsible for the qualification of the personnel operating the units.
The operator should be constantly informed about the dangers involved with their job
activities as well as preventive actions.
Make sure all persons expected to carry out operation, installation and maintenance of
the unit read and understand the safety information and operating instructions.
When using hazardous materials, the circulator may only be operated by persons that
are absolutely familiar with these materials and the circulator. These persons must be
fully aware of possible risks.
If you have any questions concerning the operation of your unit or the information in
this manual, please contact us!
Contact JULABO USA, Inc.
754 Roble Road, Suite 180
Allentown, PA 18109
(
3
š
ü
Handling:
You received a product conceived for industrial use. Nevertheless, avoid strikes to the
housing, vibrations, damages to the keypad foil (keys, display) or contamination.
Make sure the product is regularly checked for proper condition. Regularly check (at
least every 2 years) the proper condition of the mandatory, warning, prohibition and
safety labels.
Take care that the mains supply features a low impedance to avoid any negative affects
on the instrument being operated in the same mains.
This unit is designed for operation in a controlled electromagnetic environment. This
means that transmitting devices (e.g. cellular phones) should not be used in the
immediate vicinity.
Magnetic radiation may influence other units with components susceptible to magnetic
fields (e.g. a monitor). We recommend to keep a minimum distance of 1 m.
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(610) 231-0250
(610) 231-0260
info @ julabo.com
www.julabo.com