Setting The Pump Pressure - Julabo F12-MC Operating Manual

7.1.

Setting the pump pressure

Factory setting:
Stage 2
A
B
internal100 %
C
internal 20 %
external 80 %
D
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The pressure of the circulating pump is adjustable in four
grades
Flow rate: 11 ... 16 l/min
Pump pressure: 0.22 ... 0.45 bar
1.
Press the button until the menu item
is displayed.
2.
Press enter
3.
Select the parameter with the keys
4.
Press enter
Press to update the display immediately.
Adjusting the pump flow
The pump flow is pre-adjusted in the factory and can be
2
modified to suit user requirements.
• Using a screwdriver turn the screw (1) anti-clockwise
by 360 °.
1
• Using flat pliers turn the marking of the slide (2) to the
desired position.
• Tighten the screw.
Examples:
Internal applications in the bath
A 100 % internal bath circulation
(for large bath tanks)
B Reduced internal bath circulation
(for smooth surface of bath fluid)
External/internal applications
C 40 % external discharge,
60 % internal circulation
(for large bath tanks)
D 80 % external discharge,
20 % internal circulation
(for small bath tanks)
to indicate the parameter.
to store the selected parameter.
MC
(1 ... 4).
35