Change-Over Of The Key Mode; Remote Control: Activate - Deactivate - Julabo F12-MC Operating Manual

7.3. Change-over of the
Factory setting: no
7.4. Remote control: activate – deactivate
Factory setting: no
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key mode
Normally, the
working temperature.
Press the key, to call up a menu with 3 pre-adjustable
setpoints.
1.
Press the button until the menu item
displayed.
2.
Press enter
3.
Select the parameter with the keys
4.
Press enter
>no< Key
>YES< Key
Continue: Press
The circulator is to be prepared for remote control by a
personal computer via the serial interface RS232: Set the
menu item >remote< from >no< to >YES<.
1.
Press the button until the menu item
displayed.
2.
Press enter
3.
Select the parameter with the keys
4.
Press enter
>no< No remote control via RS232
>YES<
Continue: Press
key is used to indicate only one adjustable
to indicate the parameter.
to store the selected parameter.
in 1-setpoint mode
in 3-setpoint mode
to quit the menu.
to indicate the parameter.
to store the selected parameter.
to quit the menu.
MC
is
(YES/no).
is
(YES/no).
39