Operator's Responsibility - Safety Instructions; Requirements For The Operating Personnel; Operating And Ambient Conditions For Using The Unit - Julabo DYNEO DD Series Operating Instructions Manual

6

Operator's responsibility - safety instructions

6.1

Requirements for the operating personnel

6.2

Operating and ambient conditions for using the unit

10
Products manufactured by JULABO GmbH ensure safe operation when
installed, operated and according to common safety regulations. This
section explains the potential dangers which may occur when operating
the unit and specifies the most important safety measures to prevent
these dangers as far as possible.
The operator is responsible for the qualifications of the personnel
operating the unit. Ensure that the personnel who operate the unit are
trained in the relevant work application by a trained person.
The operative must receive regular training about the dangers involved
with their work and about action to prevent such dangers.
Ensure that everybody involved with the operation, maintenance and
installation have read and understood the safety information and the
operating manual. The unit may only be configured, installed,
maintained and repaired by trained personnel.
If hazardous substances or substances which may become hazardous are
used, the unit may only be used by a person who is completely familiar
with these substances and the unit. This person must be able to assess
the possible dangers in full.
•
Avoid impacts on the housing, vibrations, damage to the operative
keypad (keys and display) and heavy soiling.
•
Ensure that the product is checked at regular intervals suitable for its
frequency of use to ensure that it is in perfect condition.
•
Check the proper condition of the mandatory warning, prohibition,
and safety labels at least every 2 years.
•
Ensure that the mains supply has a low impedance to prevent
influencing of other units powered in the same mains.
•
The unit is designed for operation in a controlled electromagnetic
environment. This means that in an environment of this nature,
transmission equipment such as mobile phones should not be used
in the immediate vicinity.
•
Other units with components which are susceptible to magnetic
fields may be influenced by magnetic radiation. We recommend to
maintain a minimum distance of 1 m.
•
Permissible ambient temperature: max. 40 °C, min. 5 °C.
•
The relative humidity should not exceed 50% (40°C).
•
Do not store in an aggressive atmosphere. Protect from dirt.
•
Protect from direct sunlight.