Setting The Temperatures; 1-Setpoint Mode - Julabo F12-MC Operating Manual

5.

Setting the temperatures

è
5.1.

1-setpoint mode

Example: Actual value
Setpoint ê
è
è
Actual value ê
è
5.2. 3-setpoint mode
Factory settings:
25 °C
37 °C
70 °C
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The function of the
1. If the key is pressed, normally only one adjustable working
temperature is displayed (factory setting).
2. Press the button to call up the menu
assign a menu with 3 pre-adjustable setpoints to the
key. (see page 39)
1.
Press the key. The setpoint value instead of the actual
value is indicated on the display. The value can now be
changed.
2.
Change the value: (Example: 30.0 °C to 65.0 °C)
• Use the cursor keys
display until the numeral you wish to change blinks.
• Use the increase/decrease arrows
selected numeral (-, 0, 1, 2, 3, ... 9).
3.
Press enter
i
Setting can be carried out in the start/stop condition.
Press the key to call up the menu for temperature
selection.
3 different working temperatures are adjustable. Their values
are freely selectable within the operating temperature range.
i
Setting can be carried out in the start/stop condition.
key is configurable.
to move left or right on the
to store the value.
MC
, then
to change the
27