Subaru IMPREZA 2001 Service Manual page 27

FUEL INJECTION (FUEL SYSTEMS)
18) Install throttle body to intake manifold.
CAUTION:
Replace gasket with a new one.
Tightening torque:
22 N·m (2.2 kgf-m, 15.9 ft-lb)
19) Connect air by-pass hose (A) from purge con-
trol solenoid valve to intake manifold.
20) Install intake air temperature and pressure sen-
sor.
Tightening torque:
3.4 N·m (0.35 kgf-m, 2.5 ft-lb)
CAUTION:
Replace O-ring with new one.
INTAKE MANIFOLD
H2M2951
(A)
EN1003
H2M2960
H2M2999
FU(SOHCw/oOBD)-26
21) Connect connector to intake air temperature
and pressure sensor.
22) Connect connectors to throttle position sensor
and idle air control solenoid valve.
23) Install ignition coil and ignitor assembly.
24) Connect connector to ignition coil and ignitor
assembly.
25) Install engine ground terminal to intake mani-
fold.
E: INSPECTION
Make sure the fuel pipe and fuel hoses are not
cracked and that connections are tight.
H2M2958
B2M4265