Subaru IMPREZA 2001 Service Manual page 50

3) Connect two-way valve hose (A) to two-way
valve and connect canister hose (B) to canister.
(A)
4) Connect fuel filler hose (A) and air vent hose (B).
5) Connect fuel hoses, and hold them with clips and
quick connector. <Ref. to FU(SOHCw/oOBD)-61,
INSTALLATION, Fuel Delivery, Return and Evapo-
ration Lines.>
FUEL TANK
(B)
EN0840
EN0539
EN0540
FU(SOHCw/oOBD)-49
FUEL INJECTION (FUEL SYSTEMS)
6) Tighten band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
7) Install rear crossmember. <Ref. to RS-23, IN-
STALLATION, Rear Crossmember.>
8) Connect connectors to fuel tank cord and plug
service hole with grommet.
(A)
9) Set rear seat and floor mat.
10) Connect connector to fuel pump relay.
C: INSPECTION
1) Make sure there are no cracks, holes, or other
damage on the fuel tank.
2) Make sure that the fuel hoses and fuel pipes are
not cracked and that connections are tight.
EN0541
(B)
EN0537
EN0344