Subaru IMPREZA 2001 Service Manual page 62

FUEL DELIVERY, RETURN AND EVAPORATION LINES
CAUTION:
Replace retainer with new ones.
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect quick connector on fuel delivery line.
CAUTION:
• Always use a new retainer.
• Make sure that the connected portion is not
damaged or has dust. If necessary, clean seal
surface of pipe.
(1) Set new retainer (B) to connector (A).
(2) Push pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in the connector.
• Be sure to inspect hoses and their connec-
tions for any leakage of fuel.
S2M0228A
2) Connect fuel delivery hose to pipe with an over-
lap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When fitting length is specified.
Type B: When fitting length is not specified.
2 : 2.5 ± ± ± ± 1.5 mm (0.098 ± ± ± ± 0.059 in)
L: 22.5 ± ± ± ± 2.5 mm (0.886 ± ± ± ± 0.098 in)
S2M0229A
S2M0230A
FU(SOHCw/oOBD)-61
FUEL INJECTION (FUEL SYSTEMS)
(A) Connector
(B) Retainer
(C) Pipe
(1) Fitting
(2) Clamp
(3) Hose
S2M0231A
B2M1194B