Fuel Pump - Subaru IMPREZA 2001 Service Manual

FUEL INJECTION (FUEL SYSTEMS)

19.Fuel Pump

A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
NOTE:
Fuel pump assembly consists of fuel pump and fuel
level sensor.
1) Release fuel pressure. <Ref. to FU(SOHCw/
oOBD)-47, RELEASING OF FUEL PRESSURE,
OPERATION, Fuel.>
2) Open fuel filler flap lid and remove fuel filler cap.
3) Disconnect battery ground cable.
4) Lift-up the vehicle.
5) Drain fuel from fuel tank. Set a container under
the vehicle and remove drain plug from fuel tank.
6) Tighten fuel drain plug.
Tightening torque:
26 N·m (2.65 kgf-m, 19.2 ft-lb)
7) Raise rear seat and turn floor mat up.
FUEL PUMP
8) Remove access hole lid.
9) Disconnect connector from fuel pump.
10) Disconnect quick connector and then discon-
nect fuel delivery hose (A). <Ref. to FU(SOHCw/
G6M0095
oOBD)-60, REMOVAL, Fuel Delivery, Return and
Evaporation Lines.>
11) Move clip and then disconnect fuel return hose
(B).
EN0999
12) Remove nuts which install fuel pump assembly
onto fuel tank.
13) Take off fuel pump assembly from fuel tank.
EN0999
FU(SOHCw/oOBD)-54
(A)
(B)
EN0553
EN0554
EN0555
EN0556