Subaru IMPREZA 2001 Service Manual page 24

24) Remove bolt which installs fuel pipes on intake
manifold.
25) Remove fuel pipe assembly (B) and pressure
regulator (A), from intake manifold.
INTAKE MANIFOLD
D: ASSEMBLY
1) Install fuel pipe assembly (B) and pressure reg-
ulator (A), etc. to intake manifold.
H2M2974
2) Tighten bolt which installs fuel pipes on intake
manifold.
Tightening torque:
4.9 N·m (0.5 kgf-m, 3.6 ft-lb)
H2M2976A
3) Connect right side fuel hose to injector pipe, and
tighten clamp screw.
4) Install fuel injector pipe.
FU(SOHCw/oOBD)-23
FUEL INJECTION (FUEL SYSTEMS)
H2M2976A
H2M2974
B2M4274
H2M2975