16.Fuel
A: OPERATION
1. RELEASING OF FUEL PRESSURE
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
1) Disconnect connector from fuel pump relay.
2) Start the engine and run it until it stalls.
3) After the engine stalls, crank it for five more sec-
onds.
4) Turn ignition switch to OFF.
2. DRAINING FUEL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
1) Set vehicle on the lift.
2) Disconnect battery ground cable.
3) Lift-up the vehicle.
4) Drain fuel from fuel tank.
Set a container under the vehicle and remove drain
plug from fuel tank.
FUEL
5) Tighten fuel drain plug.
Tightening torque:
26 N·m (2.65 kgf-m, 19.2 ft-lb)
EN0344
G6M0095
EN0999
FU(SOHCw/oOBD)-47
FUEL INJECTION (FUEL SYSTEMS)
EN0999