Table of Contents
Advertisement
GENERAL INSTRUCTIONS
Reset
If the preamp does not react to the control buttons, it can easily be reset to normal operating conditions
by switching it off and back on using the POWER switch (1).
Lightning strikes
During the summer months malfunctions often occur due to voltage spikes in the power lines after
lightning strikes. Completely unplugging the power cord offers the only effective protection. Merely
switching the AC mains switch (19) off does not suffice since voltage spikes are able to arc over
separated contacts.
Interconnect cables
We supply custom - made balanced as well as unbalanced interconnect cables of any length to ensure
the best sound quality of your pre - amplifier 011. The impedance of our cables is ideally matched with
all BURMESTER audio components.
For the cleanest power supply we recommend our triple - shielded power cord BURMESTER - POWER.
Fuses
The fuses are located inside the housing and should be changed by an expert only.
CAUTION:
The AC cord must be unplugged before removing the cover! Danger of electric shock! Do not
look into the laser beam when the cover has been removed!
TECHNICAL SPECIFICATIONS
Power consumption:
Line gain:
Dimensions (W x H x D):
Weight:
PLEASE NOTE:
The dimensions do not include the space needed for the plugs of interconnect cables.
OFF:
6 W
STBY:
6 W
ON:
25 W
LO:
12 dB
HI:
15 dB (bei Volume = 60)
482 x 95 x 345 mm (inkl. Stecker)
9,6 kg
9
Hide quick links:
Advertisement
Table of Contents
