Operation - Hilti SID 22-A Manual

Torque Setting I
Setting II
Setting III

5 Operation

5.1 Inserting the battery
WARNING
Risk of injury! Inadvertent starting of the impact screwdriver.
▶ Before fitting the battery, check that the cordless impact screwdriver is switched off and that the
forward/reverse switch is in the middle position (i.e. safety lock engaged).
WARNING
Electrical hazards! Risk of short circuiting.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
impact screwdriver are free from foreign objects.
WARNING
Risk of injury! Hazard presented by a falling battery.
▶ A falling battery may present a risk of injury to yourself and others. Check that the battery is
securely seated in the power tool.
▶ Fit the battery and make sure that it is heard to engage.
5.2 Fitting the belt hook (optional)
WARNING
Risk of injury! Hazard presented by a falling power tool.
▶ A falling power tool may present a risk of injury to yourself and others. Check that the belt hook is
fitted securely before beginning work.
10
Printed: 27.07.2016 | Doc-Nr: PUB / 5293001 / 000 / 00
SIW 14­A
1/2" square 3/8" square
drive with ball- drive with
notch reten- locking ring
tion
59 ftlb 48 ftlb
f f
(80 Nm) (65 Nm)
89 ftlb 85 ftlb
f f
(120 Nm) (115 Nm)
136 ftlb 118 ftlb
f
(185 Nm) (160 Nm)
SIW 22­A
1/2" square
drive with ball-
notch reten-
tion
66 ftlb
f
(90 Nm)
100 ftlb
f
(135 Nm)
148 ftlb
f f
(200 Nm)
3/8" square
drive with
locking ring
55 ftlb
f
(75 Nm)
89 ftlb
f
(120 Nm)
129 ftlb
f
(175 Nm)